Precision-engineered glass capillaries
CapilPro
Customizable, sterilizable glass capillaries with controlled tip geometry for microdispensing and extrusion research.
| Material | Glass |
|---|---|
| Dimensions | Custom inner and outer diameters; catalogue describes diameters up to 2 mm |
| Tip fabrication | Precisely pulled sharp, conical tips with controlled geometry |
| Tip customization | Trimming and polishing to achieve the required inner diameter |
| Typical tip inner diameter | 20–80 μm |
| Characterization | Scanning electron microscopy (SEM) verification of tip geometry and dimensions |
| Sterilization | Sterilizable for controlled experimental handling; confirm the appropriate protocol |
| Actuation compatibility | Custom piston-driven or piezoelectric systems for controlled picoliter-scale dispensing |
| Extrusion use | Pneumatic and mechanical extrusion bioprinting for hydrogel-based drug formulations |
| Configuration details | Length, dimensional tolerances, actuator interfaces, dispensing settings and sterilization method are not specified in the catalogue; define these with MAKBY |
Catalogue characterization & reported results
- Catalogue describes SEM-based verification of tip geometry and dimensions
- Picoliter-scale dispensing is described with compatible custom actuation; achievable volume depends on the chosen configuration
Technical catalogue
Specifications summarized from the October 2026 tissue engineering catalogue, printed page 21. Confirm the selected configuration, compatibility and experimental conditions with MAKBY.